« Takaisin

Avaimeton käynnistys

The easy RFID works with only one button.One press on the start button will activate the transponder module what looks for an electronic key (tag).

The module will activate the ignition output if a identified tag is beside of the module. One more press on the button will activate the starter relais. The starter relay output is on as long as the button is pressed.

The ignition and the Easy RFID module switch off if the start button is pressed again for a time below 1/4 second. The module have a teach in function what allow to use different standard keys (125 kHz, EM4001) in combination with this device.

Just connect the green cable to ground and bring your tag in the area above the Easy RFID. The build in led will flash 3 times or 4 times what indicate that the Easy RFID module knows and accept the tag for the bike.

However, the Easy RFID can learn the id of 2 different tags. So, a lost tag should not be a challenge anymore. The maximum reading distance is 2 - 8 cm, depending of the antenna dimensions of the used key and the mounting position.

Avaimetonkaynnistys_kytkenta.png

Lisätiedot

Koko: 50 x 50 x 15mm
Materiaali: ABS muovi, valettu 2K epoksilla
Kytkennät: Ohjainpuoli 0,14mm², virtapuoli 1,5mm²
Virrankulutus levossa: Alle 30 uA
Max. etäisyys: 2 - 7cm, riippuen asennus paikasta
Max. lämpötila: 60°C
Jännite: 9 - 15 Volttia
Max. virta ulosotto: 20 A sytytys, 20 A strattirele